Parker Model 632 Hydraulic Tube Bender - Used

Your Price: Call 800.624.7760

Item #: 632

Mfg: Parker

Hydraulic power does the work in bending tube of all materials in sizes from 6 (3/8” O.D.) through size 32 (2” O.D.), 10mm through 50mm, with wall thicknesses as great as .188 for annealed steel, and pipe sizes from 3/8” through 1-1/2”. Contact us for specific wall thickness capabilities. The radius block, around which the tube is bent, is driven by a roller chain and sprocket powered by a cylinder and a separate hydraulic power unit.

Maximum bend angle is 180° with radii from 1 1/4” to 8”. Close second bends can be performed in either direction. An adjustable stop controls the degree of bend to a maximum of 180° and is graduated in 1° increments. After the bend is completed and pressure is released, a spring returns the clamp arm to the zero starting position.

The clamp vise arm features a quick release speed screw for positioning the required clamp block. Each size of tube requires the proper sized radius block, clamp block and slide block.

Written instructions, and Bulletin 4391-B26 are included with each bender. HB632 radius blocks, slide blocks and clamp blocks will work with the following benders as well: 624, 824, 832 and 848.

NOTE: For size 28 (1 3/4” O.D. tube) through 32 (2” O.D. tube) radius blocks, an adapter plate is required.

DIMENSIONS: L – 40” W – 11” H – 12”

This equipment must ship via common carrier. Call us at 800.624.7760 with your Zip Code and we will gladly furnish you with a shipping quote.